Description
MDA Registration No : GB288141099718
TENS devices are clinically proven useful in pain management for many patients. By reading this manual and carefully follow the treatment instructions given to you by your physician/clinician, you will attain the maximum benefits from your TENS device.
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Channel: | Dual, isolated between channels |
| Modes of Operations: | Burst, Continuous, Modulation |
| Pulse Intensity: | Adjustable 0-80MA peak into 500-ohm load each channel, constant current |
| Pulse Rate: | 2Hz-150HZ (adjustable) 30uS-260uS (adjustable) |
| Pulse Width: Timer: | 30uS-260uS (adjustable) |
| Timer: | Continuous, 30 min, 60 min |
| Burst Mode: | Burst consists of 2 bursts per sec at 100 Hz |
| Wave Form: | Asymmetrical Bi-Phasic square pulse |
| Voltage: | 0-100 Volt (open current) |
| Power Source: | 9 volts battery (Type 9V 6F22) |
Your TENS device may include the following components or accessories :
TENS unit Carry case Lead wires Electrodes Battery ( Type 9V 6F22 ) Operation manual
Mode Functions Burst ( B ) releases individual bursts twice per second, the pulse width is adjustable and the pulse rate is set at 100Hz per second.
Mode continuous ( C ) stimulation is delivered continuously at the settings determined by intensity, rate, and width knobs.
Modulation ( M ) pulse width decreases from its setting by 60 % and maintains the decreased width for 2 seconds before returning to the original width setting, which is maintained for 3.5 seconds. The cycle is then repeated. The intensity and pulse rate are adjustable.
NOTE: Use caution when you plug and unplug the wires. Pulling on the lead wire instead of its insulated connector may cause wire breakage.
CAUTION: Never insert the plug of the lead wire into an AC power supply socket
